- OFFERS A RELIABLE PODCASTING PACK - The Audio-Technica AT2020PK contains the versatile AT2020 condenser mic, noise-isolating ATH-M20x monitor headphones, and a boom arm with an integrated XLR cable.
- PROVIDES A HIGH-SPL HANDLING MICROPHONE - The AT2020 mic handles up to 144dB SPL, enabling you to record vocals and musical instruments smoothly. Plus, the cardioid microphone isolates ambient noise.
- ACCURATELY MONITOR YOUR RECORDING - The ATH-M20x dynamic headphones are tuned for enhanced low-frequency performance. It has a wide 15Hz~20kHz frequency response, ideal for studio tracking and mixing!
- BOOST YOUR BASS WITH FiiO! - The little A1 Headphone Amplifier improves the audio of your smartphone. It provides a hi-fi output and amplifies sounds up to 2.7dB or 5.2dB.
- INCLUDES - Audio-Technica AT2020PK Streaming / Podcasting Pack: AT2020 Cardioid Condenser Microphone, ATH-M20x Closed-Back Dynamic Headphones, Studio Boom Arm Threaded with XLR Cable, Protective Pouch. FiiO A1 Portable Headphone Amplifier (Silver). Blucoil 10-Foot Balanced XLR Cable (Male-to-Female). Blucoil Audio Microphone Pop Filter Double Layer Mask Shield with Stand Clip Stabilization Arm. Blucoil 6-Foot Premium Extension Cable with Stereo 3.5mm Tips. Blucoil 5-Pack of Reusable Cable Ties.
Audio-Technica AT2020PK Streaming / Podcasting Pack
The Audio-Technica AT2020PK is the ideal entry point for podcasters looking for an affordable and reliable audio streaming solution. The kit contains versatile AT2020 Cardioid Condenser Microphone, noise-isolating ATH-M20x Closed-Back Dynamic Headphones, and a boom arm with an integrated XLR cable. The AT2020PK pack provides an analog mic audio output that can be connected to a mixer or audio interface.
- Frequency Response: 20Hz~20kHz Mic | 15Hz~20kHz Headphone
- Sensitivity: -37dB (14.1mV) re 1V at 1Pa Mic | 96dB Headphone
- Impedance: 100 Ohm Mic | 47 Ohm Headphone
- Mic: 144dB SPL Max SPL | 20dB SPL Self Noise | 74dB SNR | 124dB Dynamic Range
- Phantom Power Requirements: 48V DC
- Connectors: Integral 3-Pin XLRM
Also Comes With:
FiiO A1 Silver Portable Headphone Amplifier
The FiiO A1 Silver is a headphone preamp and power amplifier that boosts your phone's audio output. The digital amp works with smartphones, tablets, MP3 Players, PCs, and more. It runs on rechargeable Li-Poly battery and lasts for up to 13 hours!
- BASS Boost: 2 Levels (Bass1: 2.7dB, Bass2: 5.2dB)
- Drive Ability: 16~150 Ohm
- Max Gain: 3.65dB
- Response: 10Hz~90kHz (-3dB, 300mV Input)
- SNR: 100dB A-wtd or Greater
- Crosstalk: 65dB or Greater (1kHz)
- THD+N: Less than 0.05% (1kHz)
- Output Impedance: Less than 0.2 Ohm
- Output Power: 78mW or Greater (16 Ohm / THD+N Less than 1%)
- Max Output Current: 50mA
- Peak Output Voltage: 4.52 Vp-p
- Input Overload: 1.35Vrms
- Connectors: 3.5mm Stereo Jack (Audio In, Headphones Out)
- Power Source: Rechargeable 160mAh Li-Poly Battery (Lasts up to 13 Hours)
- Dimensions: 42 x 41 x 9.4mm
- Weight: 20 g
Blucoil 10-FT Balanced XLR Cable
The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI. The OFC wire ensures that the best possible conductivity is provided.
Blucoil 6-FT Headphone Extension Cable
The Blucoil audio cable adds 6 feet of length to your earphones/headphones while maintaining good sound quality. It is equipped with gold-plated split 3.5mm male-to-female TRS connectors and oxygen-free copper (OFC) conductors, ensuring your signal transfer stays clean without any noise distortion. The Blucoil extension cable is compatible with smartphones, PCs, portable amps, MP3 players, and more!
Get this bundle today and receive a Blucoil Microphone Pop Filter Windscreen and 5-Pack of Reusable Velcro Cable Ties!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.